Non-ferrous Metals

All our single wire plating plants for non-ferrous metal🍌s – Cu-wire and Cu📖-alloys – coating with zinc, tin, nickel

and silver are high speed plants that can operat🐟e with up to 15 m/s.

 
The diameter range 💙is 1.2 – 2.6 mm for soft Cu (250 N/m2) and 1.0 – 2.0 mm for hard Cu (450 N/m2).

Depending on the coatin𓂃g material – according as Sn, Zn, Ni or Ag – the wire plating of non-fe꧂rrous metals

provides different benefits: 

 

Copper wires – tin🔥ned or lead-tinned: corrosion protection, improvement of the electrical conductivity

Copper wires – silvered:  corrosion prᩚᩚᩚᩚᩚᩚ⁤⁤⁤⁤ᩚ⁤⁤⁤⁤ᩚ⁤⁤⁤⁤ᩚ𒀱ᩚᩚᩚotection, improvement of the electrical conductivity, better appearance

Copper wires – nickel-plated:&💟nbsp๊; corrosion protection, increase of temperature resistance

 

The main benefits o🔜f our wire plating plants for non-ferrou෴s metals:

 

— Our scope of deliv🦩ery includes all plants that are needed for the production of coated wire such as decoilers, 

   🦩 wire drawing machine🍰s, annealing equipment, coilers
— The electrical operatinꦑg unit that we also supply completely, gu꧟arantees  an optimal synchronization of all

    inline components
— Complete solutions with ﷽integrated environmental technologies are  available
— Less amount of rinse water and reduced consumption of chemicals because of  multi-ಌstage cascades
— By the use of a vacꦉuum evaporator – that’s recommended – the process becomes free of waste-water and

    thereby the operating costs are reduced